Meade TS33F-M Betriebsanweisung PDF herunterladen (Seite 3)

RFXtrx Version 5.06 page 3 / 39

2. RFXtrx general information

The RFXtrx transceivers and RFXrec receivers are communicating over an USB port with the

Home Automation application. The RFXtrx/rec is powered by the USB port.

At startup the RFXtrx enters for 2 seconds the boot loader (red LED is on) and after this it starts

the receive/transmit firmware. If valid (decode-able) packets are received the yellow LED will

blink.

The RFXtrx315 and the RFXrec433 are mainly for use in the US. The RFXtrx315 can receive

US X10 lighting and security sensors or US Visonic PowerCode sensors at 315MHz.

The RFXrec433 can receive weather sensors of different brands at 433.92MHz.

The RFXtrx433 is a transceiver (transmitter+receiver) and can receive and control a large

number of sensors and other devices.

The RFXtrx433E is an extended RFXtrx433 transceiver.

Note: the listed protocols and brands are supported!

2.1. RFXtrx315 supported protocols

2.1.1. RFXtrx315 configured for 310MHz

Protocol Enable

receive

transmit

US X10 lighting X10 Y Y

US X10 security X10 Y Y

2.1.2. RFXtrx315 configured for 315MHz

Protocol Enable receive

transmit

Aoke relay

http://www.aliexpress.com/store/product/whose-sale-prices-DC12V10A-Learning-

Code-Wireless-Remote-Control-Switch-System-1-Receiver-and-1-

Transmitter/1211856_1774391429.html

- - Y

Visonic CodeSecure - planned

Visonic PowerCode Visonic Y Y

1 2 3 4 5 6 7 8 ... 38 39

Keine Kommentare

Meade TS33F-M Betriebsanweisung Seite 3