Meade LPI Einstellungsanleitung PDF herunterladen (Seite 6)





How to connect this product



The WTS is connected to your network using a standard

network cable and congured from the PC.



The network settings are congured on the WTS by

establishing a wireless connection between a PC and the

WTS in AdHoc mode. To communicate with this product

in AdHoc mode, the wireless setting on the PC must be the

same as the WTS.



This product supports “Windows Connect Now“, which is

one of the functions installed in Windows XP SP2.

Windows Connect Now enables connection of the WTS to a

wireless LAN by utilizing a wireless PC (Windows XP SP2)

a USB memory ‘Flash Drive‘.

This Setup Guide describes how to congure this product

using a wired Ethernet cable connection, which corresponds

to “Conguration via a wired LAN“.





This product can be congured in three ways, as listed below:

network cable

Ethernet Hub

Meade Wireless

Telescope Server

Meade Wireless

Telescope Server

Access point

network cable

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Keine Kommentare

Meade LPI Einstellungsanleitung Seite 6